Perancangan Software Impedansi Total Sistem Rangkaian Listrik Menggunakan Metode Gabriel Kron

Authors

  • Ratna Atika Universitas Tridinanti
  • Dyah Utari Yusa Wardhani Politeknik Negeri Sriwijaya

DOI:

https://doi.org/10.31851/ampere.v8i1.11349

Keywords:

impedansi total, matrik transformasi C, rangkaian ekuivalen, teori kron

Abstract

Calculating the total impedance between two points that are equivalent and connected to a current voltage source still revolves around the discussion using the Wye-Delta transformation, the theory of the Series-Parallel formula, the loop current method and the node or node voltage method. These calculations are still ineffective and take quite a long time for certain complex circuits, because the calculations can only be done manually. So we need a special solution to facilitate us in the calculation process. In this case it is necessary to do a new transformation approach called Transformation [C]. This [C] Transformation Matrix will connect the old and new equivalent circuits. This study uses the Borland C++ Builder program with four kinds of complex circuit conditions tested. From the test results it can be seen that the results of program calculations are the same as the results of manual calculations and are proven to be easier, more effective and efficient than manual calculations which are complicated and require a long and lengthy calculation process. This software is very helpful and can be applied to calculate the total impedance of an electrical circuit system, especially in certain cases of conditioned complicated circuits.

References

. Del Toro, Vincent. 1992. Electric Power Systems. Prentice-Hall, Inc. A Simon & Schuster Company.

. Edminister, Joseph A. 1983. Electric Circuit Schaum Series (terjemahan). Jakarta : Erlangga.

. Grisby, L.L. 2001. The Electric Power Engineering Handbook. CRC Press LLC.

. Heryanto, Imam dan Budi Raharjo. 2006. Pemrograman Borland C++ Builder. Bandung : Informatika.

. Kadir, Abdul dan Heriyanto. 2005. Algoritma Pemrograman Menggunakan C++. Yogyakarta : Andi.

. Raharjo, Budi dan I Made Joni. 2008. Pemrograman C dan Implementasinya. Bandung : Informatika.

. Richardson, J and G.T Reader. 1990. Electrical Circuit Analysis. Ellis Horwood Limited.

. Suarga. 2006. Algoritma Pemrograman. Yogyakarta : Andi.

. Tse, Chi Kong. 2002. Analisis Rangkaian Linear. Jakarta : Erlangga.

Downloads

Published

2023-06-30

How to Cite

Atika, R., & Yusa Wardhani, D. U. (2023). Perancangan Software Impedansi Total Sistem Rangkaian Listrik Menggunakan Metode Gabriel Kron. Jurnal Ampere, 8(1), 32–49. https://doi.org/10.31851/ampere.v8i1.11349

Issue

Vol. 8 No. 1 (2023): JURNAL AMPERE

Section

Articles

License

Copyright (c) 2023 Ratna Atika

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Creative Commons License
Jurnal Ampere is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Authors who publish with this journal agree to the following terms:

  • Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  • Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  • Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.