Konservasi Penggunaan Energi Listrik di Pabrik Area Proses Minyak (Studi Kasus PT. Indofood CBP Sukses Makmur Palembang)
DOI:
https://doi.org/10.31851/ampere.v8i2.13506Keywords:
Electrical Energy, Electrical Power, EfficiencyAbstract
PT. Indofood CBP Sukses Makmur Palembang is one of the large companies in the city of Palembang which operates in the food industry, one of which is the production of instant noodles. This company requires quite a bit of electrical energy so that the factories can continue to produce the desired number of products. The aim of this research is to find out about the use of electrical energy in the oil processing factory area of PT. Indofood CBP Sukses Makmur Palembang, to find out how much electrical energy has
been used in the PT oil processing factory area. Indofood CBP Sukses Makmur Palembang, how is electrical energy used in the oil processing factory area of PT. Indofood CBP Successfully Prosperous Palembang. This research uses observation, literature and interview methods. The results of this research are that the efficiency of electrical energy use in the factory is 70.23%, the use of electrical energy in the oil processing area factory of PT. Indofood CBP Sukses Makmur Palembang is still quite adequate, there
are still potential opportunities for saving electrical energy, namely 3,270.53 kWh, or in percentage terms it is 29.77%.
References
M. S. Aripin, “Media Pembelajaran Konservasi Dan Efisiensi Energi Instructional Media of Energy Conservation and,” 13 Oktober 2020, 2017, [Online]. Available: https://jurnal.uns.ac.id/ijcee/article/view/22416
Muchammad, Y. Eflita, M. S. K. T. S. Utomo, B. Yunianto, and Syaiful, “Konservasi Energi Pada Industri Karoseri,” J. Pasopati, vol. 1, no. 3, pp. 133–138, 2019.
D. Syachreza Himawan and B. Sudiarto, “Upaya Konservasi Energi Listrik pada Universitas Indonesia Berdasarkan Metode Intensitas Konsumsi Energi,” Edu Elektr. J., vol. 11, no. 2, pp. 30–34, 2022.
R. T. Wahyuni, D. Prastiyanto, and E. Supraptono, “MODEL POWER METERING BERBASIS HAIWELL CLOUD SCADA UNTUK EFISIENSI ENERGI LISTRIK,” J. Tek. Elektro, vol. 9, no. 1, pp. 18–23, 2017, [Online]. Available: https://journal.unnes.ac.id/nju/index.php/jte/article/view/10955/6659
D. P. W. S. Suherman, “ANALISA KAPASITAS DAYA LISTRIK TERHADAP PERUBAHAN FREKUENSI PADA MOTOR INDUKSI PENGERAK CONVEYOR BALING LINE PULP DRYER MACHINE PT. OKI PULP AND PAPER Edy,” J. Tek. Elektro, Univ. Palembang, vol. 13, no. 2, pp. 1–9, 2023.
H. B. Utomo, H. Purnama, and G. J. Adryan, “Konservasi Energi dan Audit Energi Listrik Pada Rumah Tingga,” Pros. 12th Ind. Res. Work. Natl. Semin., pp. 236–242, 2021.
D. S. Yansuri, D. E. Putra, S. Subianto, and R. Anggara, “Efisiensi Penggunaan Daya Listrik Di Hotel Carrissima Palembang,” J. Ampere, vol. 8, no. 1, pp. 50–59, 2023, doi: 10.31851/ampere.v8i1.9634.
R. A. Yani et al., “Kinerja CCR Terhadap Kuat Penerangan Lampu Landasan Pacu Pesawat di Bandara Sultan Thaha Jambi,” J. Tek. Elektro, Univ. Palembang, vol. 7, no. 2, pp. 116–122, 2022.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Daeny Septi Yansuri, Subianto Subanto, M. Wahyu Aidil Fitra
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Jurnal Ampere is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.