Rancang Bangun Prototipe Pengaman Ruangan dengan Input Kode PIN dan Multi Sensor Berbasis Mikrokontroller

Authors

  • Aries Kamolan Jurusan Teknik Elektro, Fakultas Teknik, Universitas Atma Jaya Makassar
  • Limbran Sampebatu Jurusan Teknik Elektro, Fakultas Teknik, Universitas Atma Jaya Makassar

DOI:

https://doi.org/10.31851/ampere.v6i1.5980

Keywords:

Microcontroller, arduino, PIR sensor, fire sensor, keypad, buzzer

Abstract

This research design a sistem to provide room security based on micro-controller. This research designs a system to secure a specific room using a specific code number for that only specific persons have the access to the secured room otherwise the alarm will on as a notification that inappropriate person try to enter the secured room. To enhance the security of the specific room, this research also added two others sensors; PIR sensor and fire sensor. The security system able to activates three conditions simultaneously.When the micro-controller find that one or more conditions meet the requirements, it will activate the alarm. The simulation results show that the alarm activate if somebody enter the room without deactivated the system or the system detects fire spot in the room.

 

ABSTRAK

Penelitian ini menyediakan sistem pengaman ruangan yang berbasis mikrokontroler. Mikrokontroller ini dipakai untuk mengontrol pengamanan ruangan yang menggunakan akses kode pin sehingga hanya orang tertentu yang mengetahui kode PIN tertentu dapat masuk dalam ruangan tersebut tanpa alarm berbunyi. Dengan mikrokontroller yang sama, sistem keamanan ruangan dapat ditingkatkan dengan menambah dua jenis sensor yaitu sensor yang peka terhadap tubuh manusia (PIR) dan sensor yang dapat mendeteksi Api.  Sistem pengaman ruangan ini dirancang dengan tiga kondisi yang akan aktif secara pararel. Jika satu atau lebih kondisi terpenuhi maka alarm berbunyi sebagai tanda bahwa ruangan dalam keadaan tidak aman. Hasil simulasi sesuai rancangan bahwa alarm berbunyi jika sesorang berada dalam ruangan tanpa menonaktifkan sistem atau ada nyala api dalam ruangan tersebut. Rancang Bangun Prototipe Pengaman Ruangan Dengan Kode PIN dan Multi Sensor Berbasis Mikrokontroller dapat menjadi model sistem pengaman ruangan yang mempunyai tingkat keamaman yang lebih baik.

 

References

`Aulia, Arif. 2010. Sistem Keamanan Pintu Menggunakan Password Berbasis Mikrokontroler AT89S52 (Full). (Online), (Camilo. 2012. Acces control with Arduino + Keypad 4x4 + Servo. (Online), (http://instructables.com/id/Access-control-with-Arduino-Keypad-4x4-Servo, diakses 5 April 2014).

Djuandi, Feri. 2011. Pengenalan Arduino. (Online), (http://www.tobuku.com/docs/Arduino-Pengenalan.pdf, diakses 23 Maret 2014).

`Hacks, Cooking. 2012. Tutorial: How to use the PIR Sensor with Arduino. (Online), (http://www.cooking-hacks.com/blog/tutorial-how-to-use-the-pir-sensor-with-arduino, diakses 18 Maret 2014).

Prayuda, Amri Eko. 2012. Prototype Alat Pendeteksi Kebakaran Berbasis Mikrokontroler AT89S51 Dengan Pemberitahuan Via SMS. Yogyakarta: Fakultas Teknik Universitas Negeri Yogyakarta.

Sasongko, Bagus Hari. 2012. Pemrograman Mikrokontroler Dengan Bahasa C. Yogyakarta : Penerbit Andi Publishing.

Downloads

Published

2021-06-30

How to Cite

Kamolan, A., & Sampebatu, L. (2021). Rancang Bangun Prototipe Pengaman Ruangan dengan Input Kode PIN dan Multi Sensor Berbasis Mikrokontroller. Jurnal Ampere, 6(1), 22–31. https://doi.org/10.31851/ampere.v6i1.5980

Issue

Vol. 6 No. 1 (2021): JURNAL AMPERE

Section

Articles

License

Creative Commons License
Jurnal Ampere is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Authors who publish with this journal agree to the following terms:

  • Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  • Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  • Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.