Pengaruh Pengaturan Rele Jarak Terhadap Proteksi Utama pada Penghantar SUTET 500kV
DOI:
https://doi.org/10.31851/ampere.v7i2.9069Keywords:
Pengaturan Relay, Relay Jarak, Saluran Transmisi, Arus Hubung Singkat, ProteksiAbstract
SUTET 500 kV Muara Enim merupakan Saluran Udara Tegangan Tinggi yang direncanakan  dibangun di Sumatera Selatan menuju GITET 500 kV New Aur Duri beroperasi menggunakan 2 Set Inter Bus Transformator (IBT) dengan kapasitas 2 x 500 MVA. Pemasangan Distance Relay pada GITET 500 kV Muara Enim adalah sebagai salah satu proteksi dalam pengoperasian tersebut. Tujuan Penelitian ini adalah melakukan perhitungan nilai setting Distance Relay yang sangat diperlukan dalam pengoperasian agar tidak terjadi kegagalan proteksi pada penghantar. Data perhitungan Settingan Distance Relay meliputi data penghantar, rasio CT dan PT. Kapasitas Transformator yang terpasang memiliki daya sebesar 500 MVA. Hasil perhitungan menunjukkan arus hubung singkat terbesar pada saluran transmisi SUTET 500 kV Muara Enim - New Aur Duri dengan panjang saluran 271,37 km didapatkan arus hubung singkat satu fasa ke tanah sebesar 7.374,9 A. Setting distance relay yang didapatkan dengan nilai arus hubung singkat satu fasa ke tanah setelah diturunkan dengan arus trafo didapatkan nilai 1,8 A.References
H. Samaulah, Dasar-dasar Sistem Proteksi Tenaga Listrik. Palembang: Universitas Sriwijaya, 2004.
C. C. E. M. Trickey, Protective Relay Aplication Guide Third Edition. England: GEA Measurement, 1987.
F. J. Tasiam, Proteksi Sistem Tenaga Listrik. Yogyakarta: Teknosain, 2017.
PT. PLN (Persero) Pusat, Buku Pedoman Pemeliharaan Transformator Arus. Jakarta, 2014.
PT. PLN (Persero) Pusat, Buku Pedoman Proteksi dan Kontrol Penghantar. Jakarta: Pusat Pendidikan Latihan, 2014.
V. K. M. and R. Mehta, Principles of Powers System. S. Chand & Company Ltd, 2015.
K. Venkatanagaraju, M. Biswal, and R. C. Bansal, “Adaptive distance relay algorithm to detect and discriminate third zone faults from system stressed conditions,†Int. J. Electr. Power Energy Syst., vol. 125, no. June 2020, p. 106497, 2021.
L. M. A. El-Sayed, D. K. Ibrahim, M. I. Gilany, and A. F. El’Gharably, “Enhancing distance relay performance using wide-area protection for detecting symmetrical/unsymmetrical faults during power swings,†Alexandria Eng. J., vol. 61, no. 9, pp. 6869–6886, 2022.
A. Korashy, S. Kamel, E. H. Houssein, F. Jurado, and F. A. Hashim, “Development and application of evaporation rate water cycle algorithm for optimal coordination of directional overcurrent relays,†Expert Syst. Appl., vol. 185, no. July, p. 115538, 2021.
I. B. M. Taha, A. E. ELGelaby, E. S. Ahmed, and H. A. Abd el-Ghany, “Generalized voltage estimation of TCSC-compensated transmission lines for adaptive distance protection,†Int. J. Electr. Power Energy Syst., vol. 130, no. February, p. 107018, 2021.
W. S. Seo, M. S. Kim, S. H. Kang, J. S. Yoon, and C. H. Hwang, “An improved setting method of the distance protective IEDs for series-compensated transmission lines based on a case study approach,†Electr. Power Syst. Res., vol. 188, no. October 2019, p. 106554, 2020.
SPLN T5 002 - 2, Pola Proteksi Saluran Transmisi 275 & 500 kV. Jakarta.
Downloads
Published
How to Cite
Issue
Section
License
Jurnal Ampere is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.